Sizing Guide

There is a Livella floor heating system for every home and family. Use the sizing guide below to select the perfect heater for the area that you wish to heat. Choose a UF15 under floor / in screed heater for energy-efficient and on-demand operation, and an IS35 in slab heater in new homes with access to off-peak electricity prices.

Match a reliable and efficient Livella-brand heating cable with a KT0500 Installation Kit for a complete package; including a programmable thermostat, floor temperature sensor, fixing consumables and installation monitor.

Under Tile / Under Carpet / Under Timber Heating
 
Model Number
Recommended Coverage
System Output Cable Length
UF0200  Floor Heating Cable 0.5 - 1.0m²
 200W
 13m
UF0300  Floor Heating Cable 1.0 - 2.2m²  300W 20m
UF0400  Floor Heating Cable 2.2 - 3.0m²  400W 27m
UF0500  Floor Heating Cable 3.0 - 4.0m²  500W 33m
UF0650  Floor Heating Cable 4.0 - 5.0m²  650W 43m
UF0800  Floor Heating Cable 5.0 - 6.0m²  800W 53m
UF1000
  Floor Heating Cable 6.0 - 7.5m²  1000W 67m
UF1250  Floor Heating Cable 7.5 - 9.0m²  1250W 83m
UF1500  Floor Heating Cable 9.0 - 11.0m²  1500W 100m
UF1800
  Floor Heating Cable 11.0 - 13.5m²  1800W 120m
UF2000  Floor Heating Cable 13.5 - 16.0m²  2000W 133m
UF2500  Floor Heating Cable 16.0 - 20.0m²  2500W 167m
UF3000  Floor Heating Cable 20.0 - 24.0m²  3000W 200m
 
  • Full Floor Coverage
  • Responsive Warming
  • Safe in Wet Areas (IPX7)
  • Under Floor & In Screed
  • For All Floor Coverings
  • New Homes & Renos.
  • 230 - 240VAC
  • AS/NZS/IEC Compliance 
  • Factory-fitted Cold Leads
 
In Slab Heating Cables / Background Heating for New Homes
 
Model Number
Recommended Power Density
 System Output Cable Length
IS0295  Builder's Specification (80 - 200W/m²) 295W
 8m
IS0495  Builder's Specification (80 - 200W/m²) 495W 14m
IS0735  Builder's Specification (80 - 200W/m²)  735W 21m
IS0900
  Builder's Specification (80 - 200W/m²)  900W 26m
IS1260
  Builder's Specification (80 - 200W/m²)  1260W 36m
IS1580  Builder's Specification (80 - 200W/m²)  1580W 45m
IS1820
  Builder's Specification (80 - 200W/m²)  1820W 52m
IS2030  Builder's Specification (80 - 200W/m²)  2030W 58m
IS2320  Builder's Specification (80 - 200W/m²)  2320W 66m
IS2760
  Builder's Specification (80 - 200W/m²) 2760W 79m
IS2950  Builder's Specification (80 - 200W/m²)  2950W 84m
IS3540  Builder's Specification (80 - 200W/m²)  3540W 101m
IS4225  Builder's Specification (80 - 200W/m²)  4225W 121m
IS5620  Builder's Specification (80 - 200W/m²) 5620W  161m
 
  • Great for Larger Areas
  • Economical Off-peak Tariff
  • Faster to Install (35W/m)
  • Install in Concrete Slab
  • Under All Floor Coverings
  • For New Homes Only
  • 230 - 240VAC
  • AS/NZS/IEC Compliance 
  • Single Power Lead
 
"I accidentally drilled through my tiles and into my floor heating system, without thinking. Livella were fantastic, delivered a repair kit directly to my home, and walked my electrician through the repair process. In 20 minutes I was up and running again!"
Craig Marcello
 
 

Retirement Home
Livella was tasked by a prominent aged-care developer to create an easy to use heating system, that put residents in control of their budgets.


Livella’s UF15 floor heating cables are the fastest installing on the market. Under tiles, timber or carpet, or in a screed, installations are easier and more affordable.